Disinfettante Fumispore OPP – Elimina fino al 99,99% batteri, muffe, lieviti e funghi – per volumi di 25 – 50 m3

Disinfectant smoke bomb Fumispore OPP 25 – 50 m³ - 4 pieces package

Product for disinfecting environments with fumigation

Disinfectant Smoke generator Fumispore OPP for surface disinfection treatments of environments of  25 - 50 m3
Dry smoke disinfectant that allows you to perform environmental disinfection of air and surfaces in a simple way.
  • Eliminates up to 99.99% bacteria, molds, yeasts and fungi
  • Dry treatment of surface
  • Does not require specific equipment
  • Room accessible after about 12 hours
  • Activity based on orthophenylphenol
  • Used for Shock or maintenance treatments
  • Complies with the European Biocides Directive
  • Medical Surgical Presidium registration no. 19238
  • Tested with ANFOR method
  • Suitted for the food sector
PACKAGE CONTENT: 4 DISINFECTANT SMOKE BOMBS FUMISPORE 25 -50 m3
GEA-IAS-FSP-1134-25-50
61.34 €
Tax excluded

 

COMPOSITION AND CHARACTERISTICS OF DISINFECTANT BOMB FUMISPORE OPP:

  • Active substance: Orthophenylphenol 20%.
  • Smoke excipients: 80%
  • White smoke powder
  • Product tested according to ANFOR NF T 72-281 standards

TOXICOLOGICAL DATA

Fumispore OPP LD 50 (Lethal Dose) is higher than 2900 mg/Kg

Classified Xi: irritant. R36/37/38: irritating to eyes, respiratory system and skin

Attention: biocidal product, to use Fumispore safely always read the label and product information carefully.

Used for disinfection of surfaces by air of the rooms, the disinfectant smoke bomb Fumispore must be used in closed premises free from presence of people, animals, plants or food.
The disinfectant treatment can be carried out during the night, it is only necessary to ignite the can and after about 12 hours the treatment is finished, and the premises are accessible again.

For an optimal and effective use of  the smoke generating disinfectant based on OrthoPhenylPhenol, it is necessary to calculate the volume of the room to be treated.

Before ignite the can:

    • Switch off the ventilation systems
    • Close the exits
    • Deactivate smoke detectors
    • Protect smoke-sensitive devices
    • Place the can(s) on heat-resistant supports away from combustible material.

Fumispore can be used for Shock or Maintenance treatments.

  • Shock treatment: 0.8 g/ m3 o perform this treatment refer to the minimum volume indicated on the can (25m3). If the environment is 50 muse two cans of 25 - 50 m3
  • Maintenance: 0.4 g /m3. To carry out this treatment refer to the maximum volume indicated on the can (50 m3).

The smoke bomb disinfectant Fumispore OPP performs its bactericidal and fungicidal action in 4 phases:

Phase 1: Spreading the active ingredient - Fumigant compounds spread the active bactericidal and fungicidal ingredient in the air and on the surfaces of the environment.

Phase 2: Aggregation - the particles of the fumigants affect the microorganisms in the environment and eliminate them by enclosing them in compact aggregates.

Step 3: Chemical destruction - during the first hours of the treatment bacteria, fungi, yeasts and molds are eliminated.

Step 4: Sedimentation - Aggregates sediment slowly (1meter/hour) disinfecting the air.


National and
International shipments


Secure
Payments


Certifications

You might also like

Similar products