Disinfettante Fumispore OPP – Elimina fino al 99,99% batteri, muffe, lieviti e funghi – per volumi di 250 – 500 m3

Dry smoke disinfectant Fumispore OPP 250 – 500 m³ - 2 pieces package

Smoke generator for dry disinfection treatments

Dry smoke disinfectant Fumispore OPP is a sanitizing product that eliminates up to 99,99% of bacteria, molds, yeasts, and fungi – for environments of 250 - 500 m3

Dry disinfectant for surfaces treatments that can be carried out autonomously.

  • Eliminates bacteria, fungi, yeasts and molds up to 99.99%.
  • Dry treatment of surfaces
  • Does not require the use of specific machinery or equipment
  • Easy to use
  • Accessible environments after about 12 hours
  • Activity based on orthophenylphenol
  • Suitable for shock or maintenance treatments
  • Complies with the European Biocides Directive
  • Recognized by the Ministry of Health as Medical Surgical Presidium
  • Tested with ANFOR method
  • Also used for the disinfection of food industry environments

PACKAGE CONTENT: 2 DRY SMOKE DISINFECTANTS

GEA-IAS-FSP-250-500
97.50 €
Tax excluded

 

COMPOSITION AND CHARACTERISTICS OF FUMISPORE OPP:

  • Active substance: Orthophenylphenol 20%.
  • Smoke excipients: 80%
  • White smoke powder
  • Product tested according to ANFOR NF T 72-281 standards

TOXICOLOGICAL DATA

  • Fumispore OPP LD 50 (Lethal Dose) is higher than 2900 mg/Kg
  • Classified Xi: irritant. R36/37/38: irritating to eyes, respiratory system and skin

Attention: this is a biocidal product for dry disinfection works. Before using it, read the label and product information carefully.

Dry smoke generator for environmental disinfection of air and surfaces by fumigation.

  • Fumigation duration: about 12 hours.
  • It must be carried out only in the absence of people, animals, plants or food.

How to use the Fumispore OPP:

  • Calculate the volume of the premises to be dry disinfected
  • Shutting down ventilation systems
  • Close all room exits
  • Deactivate smoke detectors
  • Protect all smoke-sensitive devices
  • Place the can on heat-resistant supports and away from combustible material
  • Ignite the can.

Indications for the desired type of dry disinfection treatment:

  • Shock treatment (0.8 g of product/ m3) keep the minimum volume indicated on the can (250 m3) as a reference.
  • Maintenance treatment (0.4 g of product / m3) consider the maximum volume indicated on the can (500 m3).

The dry disinfectant Fumispore OPP performs its bactericidal and fungicidal action in 4 phases:

Phase 1: The active ingredient is spread evenly in the environment by the fumigating compounds.

Phase 2: The microorganisms are incorporated in compact aggregates.

Step 3: During the first hours of the treatment the chemical destruction of bacteria, fungi, yeasts and molds in the environment.

Stage 4: the aggregates sediment slowly (1meter/hour) determining the purification of the air.


National and
International shipments


Secure
Payments


Certifications

You might also like

Similar products