Ozonator for ozone disinfection of air and water - Terminator 1
Ozone generator for disinfection of enviroments up to 100 m³
Ozonator Terminator 1 made in Italy. It does not produce carcinogenic ultraviolet radiation and toxic substances (NOx). Biocidal action up to 99.99% for ozone disinfection of environments with maximum volume of 100 m³.
This ozonator can be used for air and water, for personal and professional use.
- It eliminates up to 99,99% the microbial load
- Ozonator designed and manufactured in Italy, in compliance with CE standards.
- Case structure with handle, practical for transporting the ozone generator by hand from one room to another.
- Equipped with Ceramic diffuser nozzle, to treat areas where it is not possible to insert the ozone machine
- Equipped with an ozone resistant pipeline / tube, for delocalized or water injection
- Digital programming
Can be operated in two modes:
- Single operation, allows to disinfect the environment in a deep way (the ozonator must be operated in the absence of people and animals)
- Cyclic operation, infinitely continuous operation of the ozone generator to eliminate unpleasant odor and disinfect the environment (the treatment can be carried out in the presence of people and animals).
- Vertical development structure in galvanized steel plastic coated
- Briefcase structure, for an easy transportation
- Dimensions (mm): Width 110 x Length 300 x Height 300
- Weight: 3,5 Kg
- Handle and rubber feet
- Control panel with digital programmer, switch, indicator light
- Remote control on and off
- 1 fan of 48 m³ per hour
- Total power 45 Watt
- Operating voltage 230 Vac + 12 Vdc
- Ozone resistant piping
- Ceramic diffuser nozzle
- Power cable with DIN plug/cigarette lighter socket 12Vdc.
- Molecular Sieve Filter, to prevent the formation of nitrogen oxides NOx, nitrogen dioxide NO2 and Nitric Acid HNO3, the main causes of serious damage to electrical and electronic circuits and all technological systems.
Accessories included with ozonator Terminator 1:
- Cyclic Programmer
- 1 remote control
- 1 tubing with non-return valve and diffuser nozzle, ozone-resistant
- 1 power supply 230 Vac
- 1 cable with connector for cigarette lighter socket use
How to use the ozone machine Terminator 1
The ozonator Terminator 1 is suitable for ozone air disinfection with the aim to deodorize and decontaminate indoor environments and for ozone surface treatment, carried out for removing germs, viruses, bacterial loads, fungi, molds, spores and pests.
It used in water to obtain sanitary disinfectant to be used to wash floors and surfaces, to disinfect food or to obtain ultrapure water, free of bacteriological contamination.
- Maximum disinfecting air volume: 100 m3.
- Maximum ultrapure water: 600 litres.
- Maximum sanitary disinfectant: 60 litres in 60 mins.
For a deep disinfection using the ozonator Terminato 1 it is recommended to proceed room by room.
The Terminator 1 can disinfect all the indoor environments up to 100 m3. Ozone can also be injected in water.
- A room measuring 5m x 5m with a height of 3 m (75 m3) is disinfected in about 45 minutes.
- An area of 100 m3 will be disinfected in about 60 minutes.
- A room of 50 m3 is disinfected in about 30 minutes.
The maximum disinfecting capacity of this ozone generator is 100 m3/h, even if the ozone machine works for more than 60 minutes the disinfecting capacity is not increased because ozone quickly reconverts into oxygen.
To effectively disinfect environments with larger volumes, we recommend the use of an ozone generator that can disinfect a larger volume (in case of open space), or to proceed with the disinfection room by room (each room must have a maximum volume of 100 m3).
You might also like