Filtro Dräger X-plore® 1140 A2B2E2K2 HgNO/CO P3 RD

Respirator filter Dräger X-plore® 1140 A2B2E2K2

Respirator filter with standard connection Rd40 suitable for full face mask

Respirator Filter Rd40 Dräger X-plore® 1140 A2B2E2K2 HgNO/CO P3 RD, for half and full-face mask or full face respirator, protects from gases, vapours and dusts. 

  • Maximum protection of the respiratory tract
  • Suitable with half-masks and full face respirators with standard threaded connection Rd40 according to EN 148-1.
  • EC marked in accordance with EN 14387 and/or EN 143.
  • The robust aluminium housing allows to detect any damage to the respirator filter
  • Packed individually
GEA-DPI-FLT-1104-6738814
Out-of-Stock
45.90 €

SEND TO A FRIEND REQUEST INFORMATION

Notify me when available
 
  • Filter body material: Aluminium
  • Suitable for half-masks and full face respirators with standard threaded connection Rd40 according to EN 148-1.
  • Respirator filter duration: 50 hours
  • R Mark: approved for reuse over several shifts
  • D mark: it has passed dolomite test. 

    Colour legend:

      A - Brown = Gases and vapours of organic compounds with boiling point > 65 °C

        B - Grey = Inorganic gases and vapours

          E - Yellow = Sulphur dioxide, hydrogen chloride

            K - Green = Ammonia 

              CO - Black = Carbon monoxided 

                Hg - Red = Mercury vapour

                  NO - Blue = Nitrous gas

                    P – White = Particles

                    This respiratory protection filter Dräger X-plore® Rd40r can only be used with half and full face respirator such as Dräger X-plore® 6300 or Dräger FPS® 7000.

                    How to mount the respirator filter on the full face respirator correctly:

                    • Remove the protective cap on the air outlet hole.
                    • Screw the filter on the Rd40 connection of the full face mask
                    • Before using the mask: remove the protective cap on the air inlet hole. 
                    • After use: reposition the cap on the air inlet hole.

                    The Dräger X-plore Rd40 series offers numerous types of respirator filters for all major applications where the respiratory tract of the worker needs to be protected.

                    The respirator filter 1140 A2B2E2K2 HgNO/CO P3 RD protects the respiratory tract for a gas content between 0.1 % and 0.5 % by volume of the following substances: 

                    • Organic gases and vapours with boiling point > 65 °C
                    • Inorganic gases and vapours, such as, for example: chlorine, hydrogen sulphide, hydrogen cyanide 
                    • Sulphur dioxide, hydrochloric acid Green 
                    • Ammonia 
                    • Mercury vapours 
                    • Nitrous gases, including nitrogen monoxide 
                    • Powders
                    • Carbon Monoxide

                    National and
                    International shipments


                    Secure
                    Payments


                    Certifications

                    You might also like