Disinfettante Fumispore OPP – Elimina fino al 99,99% batteri, muffe, lieviti e funghi – per volumi di 50 – 100 m3

Aerial disinfectant Fumispore OPP 50 – 100 m³ - 4 pieces package

Name: Aerial disinfectant Fumispore OPP 50 – 100 m³ - 4 pieces package
SKU: GEA-IAS-FSP-1134-50-100
Price: 63.56 EUR
Availability: InStock

Biocide that kills 99.99% of viruses and bacteria

Aerial disinfectant Fumispore OPP is a product used for surface disinfection by fumigation. It eliminates up to 99,99% of bacteria, molds, yeasts, and fungi – for room volumes of 50 - 100 m³.

Aerial disinfectant for environmental disinfection of air and surfaces.

Removes up to 99.99% of bacteria, fungi, yeasts and molds.
Dry treatment, does not create humidity
Does not require specific machinery or equipment
Premises accessible after about 12 hours
Activity based on orthophenylphenol
Suitable for Shock or maintenance treatments
Complies with the European Biocides Directive
Medical Surgical Presidium registration Ministry of Health no. 19238
Tested with ANFOR method
Suitted for the food sector

PACKAGE CONTENT: 2 AERIAL DISINFECTANTS FUMISPORE

Reference GEA-IAS-FSP-1134-50-100

52.10 €

SEND TO A FRIEND REQUEST INFORMATION

COMPOSITION AND CHARACTERISTICS OF AERIAL DISINFECTANT FUMISPORE OPP:

Active substance: Orthophenylphenol 20%.
Smoke excipients: 80%
White smoke powder
Product tested according to ANFOR NF T 72-281 standards

TOXICOLOGICAL DATA

Fumispore OPP LD 50 (Lethal Dose) is higher than 2900 mg/Kg
Classified Xi: irritant. R36/37/38: irritating to eyes, respiratory system and skin

Attention: biocidal product, to use it safely always read the label and product information carefully.

This smoke bomb disinfectant is used for aerial disinfection of surfaces.

The treatment can only be carried out in the absence of people, animals, plants or food.
Simple aerial disinfection, after igniting the can it is only necessary to wait about 12 hours before returning to the decontaminated environment. Thanks to its simplicity it can be performed overnight.

To make the best use of this aerial disinfectant and guarantee the effectiveness of the treatment:

Calculate the volume of the room
Turn off the ventilation systems
Close the exits
Deactivate smoke detectors
Protect smoke-sensitive devices
Place the can(s) on heat-resistant supports away from combustible material.
Ignite the can.

Two types of dry treatment are possible:

Shock treatment: 0.8 g of product per m³. To carry out this treatment consider the minimum volume indicated on the can (50 m³).
Maintenance: 0.4 g of product per m³. To carry out this treatment consider the maximum volume indicated on the can (100 m³).

With the aerial disinfectant Fumispore OPP the environment will be disinfected in 4 stages:

Step 1: Spreading the active ingredient - the fumigant compounds spread the bactericidal and fungicidal active ingredient throughout the entire volume of the environment.

Phase 2: Aggregation - the particles of the fumigants incorporate the microorganisms in the air and on the surfaces of the environment into compact aggregates.

Step 3: Chemical destruction - during the first hours bacteria, fungi, yeasts and molds are destroyed.

Step 4: Sedimentation - the aggregates sediment slowly (1 metre/hour) disinfecting the air.